TOST Master Cylinder PTC
050400, 050401
TOST Master Cylinder PTC
General Description
TOST Master Cylinder PTC "Pull-Type" - is a newly designed product and is special because of the actuation by pulling. The installation can be made e.g. in LS gliders for actuation of the brake via the pedals. The installation dimensions are very small. The sealing and the overall quality is high-grade.
Use above selections for TOST Master Cylinder PTC fluid type.
|
P/N SKU |
Desc | Fluid |
App (Suitable Brake Assy.) |
Max Oper Press Bar |
Conn Thread |
Weight g |
| 050400 | PTC | DOT4 | BZT, BZT2, 30-9, 30-63A | 100 | M10X1 | 120 |
| 050401 | PTC | Mil-H | BZT, BZT2, 30-9, 30-63A | 100 | M10X1 | 120 |
Master cylinder are the components in a hydraulic brake system, that produce the necessary brake respectively hydraulic pressure to push the brake linings against the brake disk. In addition to our brake assemblies, we manufacture a wide variety of master cylinders, available from stock, which can be used in different combinations. In general, three types of master cylinder can be classified:
- Hydraulic brake lever, which can be mounted directly to the control stick. The actuation is carried out directly by the pilot.e.g.: HBG, HBGD, HBGSH
- Rudder pedal master cylinder, which can be mounted to additional small pedals on the rudder pedals or at a user-defined place in the fuselage. If the installation is not realized at the rudder pedals, the actuation has to be realized with a bow- den cable or push-rods. e.g.: PHBZ, 10-30
- Universal master cylinder for user-defined installation in the fuselage. The actuation has to be realized with a bowden cable or push-rods. e.g.: Form 7
TOST Master Cylinder PTC is a special order items. Please allow approximately 4 weeks for delivery.
Always use TOST Tires and Tubes when available.
See "Tech Data" tab for Description, Application and Technical Data.
See "Docs" tab for "TOST Tire, Tube & Wheel Selection Guide".
