In stock
$380.00
Overview
LXNAV Flap Sensor UNI
No Additional Tariff Fee
Related Products
LXNAV FLAP Sensor UNI
General Description
LXNAV FLAP Sensor UNI is designed to measure the position or angle of the flaps. It is very useful to direct the pilot with the correct flap setting. The new improved UNI variant with disconnectable cable enables much simpler installation and maintenance of the sensor and can be connected to both LX80xx/90xx and S8x/10x devices at the same time with a UNI 485/CAN Splitter (not included).
| Parameter | Conition | Min | Typ | Max | Unit |
| Operating Supply Voltage(1) | 8 | 12 | 18/36(2) | V | |
| Current Consumption(1) | 30 | mA | |||
| Operating Temperature | -20 | +65 | °C | ||
| Storage Temperature | -40 | +85 | °C | ||
| Recommended Humidity | 0 | 95 | RH | ||
| Weight | 25g | g | |||
| Ingress Protection | IP4X | ||||
Note1: Supplied via CAN or 485 BUS
Note2: New model of the unit since 2022.
Version 2 - Universal Flap Encoder – possible to connect either on RS485 or CAN
- LXNAV Flap Encoder (SKU:FLAP_ENC-UNI)
- Detachable universal cable for Flap Encoder (SKU:UNI-CA)
Optional:
- Universal CAN-485 splitter cable with which is possible to connect RS485 and CAN devices simultaneously. Only for version 2 - Universal Flap Encoder. SKU:UNI-485CAN-SPLITTER
Features
- Extremely accurate
- Very small and light
- RS-485 / CAN bus
- Plug and play to LX 80/90xx systems and S8x/10x variometers
- Installed already in most modern gliders
Flap Calculation Source
- Glider’s flap specification table
- Wing loading (ballast)
- Polar and g-force
Write Your Own Review
We found other products you might like!
