LXNAV S8 / S80 Variometer
LXNAV S8 / S80 Variometer
A stand–alone digital variometer, final glide calculator and navigation system with moving map.
General Description
LXNAV S8/S80 is a standalone digital variometer, final glide calculator and navigation system with a simple moving map. The LXNAVS8/S80 has both GPS/FLARM and PDA/PNA input/output. The unit has standard dimensions that will fit into a glider panel with an opening of 80 mm diameter (3.15″) or 57 mm diameter. It is also able to supply a PDA/PNA with power (5VDC/1A). The unit has an integrated high precision digital pressure sensor and inertial system. The sensors are sampled more than 100 times per second. Real Time Data is displayed via a vario needle, an airspace map and up to 4 variable numeric fields displayed on a QVGA 320x240 pixel, 3.5″ (S80) or 2.5″ (S8), high brightness (1200 nits) color display. To adjust values and settings the LXNAV S8/S80 has two rotary push button knobs and three additional push buttons.
The LXNAVS8/S80 can be expanded with one or more repeaters (LXNAV S8/S80) via the CAN bus. This allows both pilots in a two-seat glider to have independent control of all functions of each unit in the front or the rear seat.
Features
- An extremely bright 3.5’’ (S80) or 2.5” (S8) QVGA color display readable in all sunlight conditions with the ability to adjust the backlight.
- Two rotary switches (knobs) with push button function and three push buttons are
used for input. - Pre-loaded polar database for nearly all gliders.
- GPS/FLARM and PDA/PNA input/output.
- FLARM Indication if a FLARM is connected to the GPS/FLARM port.
- Programmable “needles” for selectable data such as netto vertical speed, relative (super netto) and vertical speed (vario).
- 320x240 pixels colour screen for additional information such as average, thermal vario, time, speed etc…
- Many custom audio settings.
- 100Hz sampling rate for very fast response.
- Speed to fly indication.
- TE compensation can be selected to be either pneumatic TE probe or electronic TE.
- Audio equalizer, for custom vario sound performance.
- Audio thermal assistant.
LXNAV S8 / S80 price varies depending on selection.
Use above dropdown box for selections and final price.
S8 Technical Data
Size And Weight | Width: 61 mm | Depth: 95 mm |
Height: 61 mm | Weight: ~330 g | |
Navigation | Modes | Final Glide |
Info | Final glide indication | |
Flarm | MC setting | |
Thermal Assistant | Ballast setting | |
Waypoint | Bugs setting | |
Task | Polar selection | |
Setup | ||
Flarm | Additional | |
Indication | AHRS (AHRS activation with a CODE – no need of for any hardware upgrade) | |
Objects on the map | Remote stick (CAN) | |
Warnings | Compass module (not supported yet – under development) | |
Sound warnings | MOP sensor (not supported yet – under development) | |
FlarmNET support | S8D repeater unit | |
Oudie | ||
Nano/Nano3/Nano4 | ||
FLAP sensor | ||
Bluetooth Stick | ||
Airspace | Navboxes | |
Airspace Display | 4 configurable (navboxes) values | |
CUB compatible or from LXNAV database | 3 configurable (navboxes) values on map screen | |
Speaker | External speaker with adjustable volume | |
Smooth audio output | ||
Audio equalizer | ||
Integrated synthesized speech output | ||
Audible thermal assistant | ||
Chip | ARM Cortex-M4 160MHz | |
Display | 2.5-inch sunlight readable | |
16 bit color display | ||
1200 cd brightness | ||
320-pixel-by-240-pixel resolution | ||
ALS – ambient light sensor | ||
Sensors | High resolution variometer | |
High resolution pressure altitude sensor measures up to 16000m (~52500ft) | ||
Inertial platform 3 axis accelerometer (+-8g) and 3 axis gyroscope | ||
Advanced engine noise level sensor (also for JET engines) | ||
Digital temperature compensated pressure sensors for altitude and airspeed | ||
Connections | 6 digital inputs | |
GPS port input/output on RS232 level (standard IGC 6 pin connector RJ11) | ||
PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A) | ||
Audio output | ||
1Mbit CAN bus for connection for SxxD repeater, Compass module , MOP sensor or Remote stick | ||
Speed command and Vario priority input and 4 additional user defined inputs | ||
Buttons | 2 x Rotary buttons with push function | |
3 x Push buttons | ||
Storage | 16 GBytes of internal memory | |
Integrated SD card reader | ||
Consumption | LXNAV S8 at 12V (power input 10-16V) | LXNAV S8D at 12V (power input 10-16V) |
120 mA – minimum brightness without audio | 90 mA – maximum brightness without audio | |
180 mA – maximum brightness without audio |
||
Material |
Aluminum housing |
S80 Technical Data
Size And Weight | Sensor Box | All Together |
Width: 65 mm | Width: 81 mm | |
Height: 45 mm | Height: 81 mm | |
Depth: 85 mm | Depth: 132 mm | |
Weight: ~460 g | ||
Navigation | Modes | Final Glide |
Info | Final glide indication | |
Flarm | MC setting | |
Thermal Assistant | Ballast setting | |
Waypoint | Bugs setting | |
Task | Polar selection | |
Setup | ||
Flarm | Additional | |
Radar | AHRS (AHRS activation with a CODE – no need of for any hardware upgrade) | |
Indication | Remote stick (CAN) | |
Objects on the map | Compass module (not supported yet – under development) | |
Warnings | MOP sensor (not supported yet – under development) | |
Sound warnings | S80D repeater unit | |
FlarmNET support | Oudie | |
Nano/Nano3/Nano4 | ||
FLAP sensor | ||
Bluetooth Stick | ||
Airspace | Navboxes | |
Airspace Display | 4 configurable (navboxes) values | |
CUB compatible or from LXNAV database | 3 configurable (navboxes) values on map screen | |
Speaker | External speaker with adjustable volume | |
Smooth audio output | ||
Audio equalizer | ||
Integrated synthesized speech output | ||
Audible thermal assistant | ||
Chip | ARM Cortex-M4 160MHz | |
Display | 3.5-inch sunlight readable | |
16 bit color display | ||
1200 cd brightness | ||
320-pixel-by-240-pixel resolution | ||
ALS – ambient light sensor | ||
Sensors | High resolution variometer | |
High resolution pressure altitude sensor measures up to 16000m (~52500ft) | ||
Inertial platform 3 axis accelerometer (+-8g) and 3 axis gyroscope | ||
Advanced engine noise level sensor (also for JET engines) | ||
Digital temperature compensated pressure sensors for altitude and airspeed | ||
Connections | 6 digital inputs | |
GPS port input/output on RS232 level (standard IGC 6 pin connector RJ11) | ||
PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A) | ||
Audio output | ||
1Mbit CAN bus for connection for SxxD repeater, Compass module , MOP sensor or Remote stick | ||
Speed command and Vario priority input and 4 additional user defined inputs | ||
Buttons | 16 GBytes of internal memory | |
Integrated SD card reader | ||
Consumption | LXNAV S80 at 12V (power input 10-16V) | LXNAV S80D at 12V (power input 10-16V) |
140 mA – minimum brightness without audio | 90 mA – minimum brightness without audio | |
190 mA – maximum brightness without audio | 140 mA – maximum brightness without audio | |
Material | Aluminum housing |
- LXNAV S8 or S80 main unit
- Main power cable for S8/S80 + CAN terminator
- Speaker
- GPS cable (S7-GPS-IGC included, other types optional, this cable is included only with the S8x device)
- PDA cable (optional)
- 2x6 mm screw
Configurations
S8 Club | S8 | S80 Club | S80 | |
Dimension | 57mm | 57mm | 80mm | 80mm |
TSK mode | Optional | Optional | ||
Airspace | Optional | Optional | ||
Digital inputs | SC & VP included (4 optional) | 6 | SC & VP included (4 optional) | 6 |
Pilot profiles | Optional | Optional |
LXNAV Cable Guide
Select the Right Cables by Referring to Our: