LXNAV Flap Standalone (Indicator & Encoder)

LXNAV Flap Standalone

General Description

LXNAV Flap Standalone - The Flap sensor is designed to measure the position or angle of the flaps. It is very useful to direct the pilot with the correct flap setting.

LXNAV FLAP indicator is a small display unit with a red 10×7 LED matrix display for indicating preconfigured flap positions. It can be used as part of the main instrument or as a standalone unit connected only to the LXNAV FLAP sensor. The display has no buttons or any other user interactives. All settings and firmware upgrades are made via the main instrument or a PC and Mini-USB cable.

Flap Sensor

The Flap sensor is designed to measure the position or angle of the flaps. It is very useful to direct pilot with correct flap setting.

Flap Calculation Source:

• Glider’s flap specification table
• Wing loading (ballast)
• Polar and g-force

Main Features:

• Extremely accurate
• Very small and light
• RS-485 / CAN bus
• Plug and play to LX 80/90xx systems and S8x/10x variometers
• Installed already in most modern gliders 

Flap Indicator

LXNAV FLAP indicator is a small display unit with a red 10×7 LED matrix display for indicating preconfigured flap positions. It can be used as part of the main instrument or as a standalone unit connected only to the LXNAV FLAP sensor. The display has no buttons or any other user interactives. All settings and firmware upgrades are made via the main instrument or a PC and Mini-USB cable.

Main Features:

• Very low power
• 10×7 LED matrix display
• Very small and light
• RS-485
• Plug and play to LX 80/90xx systems or stand-alone (must be purchased in combination with a flap sensor)

Connect To:

Select the Right Cable by Referring to Our

Gliding is what we love,
navigation is what we do.