IMI Trailer Drawer
IMI Trailer Drawer
General Description
IMI Trailer Drawer - for storing of One Man Rigging System or POWER-RIGGER, Tow Bar, Wing Stands, or other equipment. Available now as a retrofit kit for all modern or older sailplane trailers. Your gear can be safely stored and transported in the lockable splash water and dustproof drawer which is attached behind the axle of the trailer close to the center of gravity.
Adding an IMI Trailer Drawer significantly improves the storage possibilities of your trailer.
The IMI Trailer Drawer is bolted to the trailer by a solid and robust aluminum frame with solid double ball-bearing telescopic rails. The fiberglass drawer itself is completely sealed by Pirelli rubber profiles against moisture, splash water, and dust. The drawer comes almost completely out of the telescopic rails while opened (75cm move), which makes loading and unloading of the stored equipment very comfortable. The drawer with frame is bolted to the bottom of the trailer (sandwich plate/foam button or profile frame bottom) by 9pcs of M10/70 or M10/90 bolts. Attachment close to the axle of the trailer ensures the neglectable change in the center of gravity of the trailer, the up-swept rear edge ensures sufficient clearance of about 15cm above ground (which is similar to clearance of common cars). Maximum weight of stored equipment in the drawer: 32kg, max permitted speed 100km/h.
| Internal Dimensions | Width: 110 cm Depth: 82 cm Height: 20 cm |
| External Dimensions incl. Frame | Width: 137 cm Depth: 103 cm Height: 22 cm |
| Weight of the Complete Kit | 26 kg (57.32 lbs.) |
| Max. Permitted Load | 32 kg (70.54 lbs.) |
| Max. Permitted Speed with Drawer | 100 kmh (62.13 mph) |
-
Complete assembled and sealed drawer with aluminum frame and telescopic rails
-
All necessary bolts, washers, and nuts for attachment to the trailer, bushings for sandwich bottom (Cobra trailer)
-
Counter plate for lock (incl. blind rivets, to be riveted to the bottom in a proper place)
-
A cartridge of black Mammut glue for sealing the connection drawer frame to the bottom of the trailer
-
2pcs of keys for the lock
-
User manual with installation and maintenance instructions: Here
- COBRA Trailers
- Anschau Komet Trailers
- Swan Trailers
- Most Pfeiffer, Schroeder and similar trailers
- For other producers or homebuilt trailers please contact us with photos and dimensions to check the compatibility. The depth and height of the drawer is designed to fit to any trailer which is at least 108cm wide at the bottom.
The IMI Trailer Drawer was tested intensivelly installed to the Cobra trailer in different conditions (speed up to 140kmh) and proved to be solid and safe for use. The installation to the trailer and use on the public roads is at own risk of the owner/operator of the trailer and we don´t take any response for potentional damage or injuries caused by use of the device. Use of damaged, unlocked, overloaded or improperly installed drawer could be dangerous. Allways check whether the drawer is locked and not damaged before the drive with the trailer. Do not drive with the trailer with damaged or unlockable drawer (contact us in such case or remove the drawer from the aluminium frame).
IMI Trailer Drawer Installation ManualW&W typically stocks IMI Trailer Drawers.
IMI Trailer Drawer is an expensive item to ship. Our shopping cart will not issue an accurate shipping total. It is best to email or call us before placing your order so we can give you an accurate shipping cost.
You can also stop by our shop in Eagle, Idaho (we'd love to see you) and pick up the item with no additional shipping fees.
