LXNAV NANO4 Flight Recorder
Manufacturer Part Number: NANO4
No Additional Tariff Fee
LXNAV NANO4 Touch Screen IGC Flight Recorder


General Description
LXNAV Nano4 is the first retina touchscreen flight recorder from the NANO series. Fly without any cables and chargers! A 2800mAh battery serves up to 25h with advanced power management. The Nano4 has 7 buttons for easy handling in turbulent air. All handling can be done via the Touchscreen or these 7 buttons.
The NANO4 flight recorder is the smallest flight recorder designed in accordance with the IGC "All Flights" specification. It has IGC approval level 1 for all flights, including world records. It features an integrated 56-channel GPS receiver with a built-in antenna, an altitude sensor, an ENL sensor, a security micro-switch, a Bluetooth module, a Wi-Fi module, and a 2800 mAh battery
The built-in battery allows up to 36 hours of stand-alone operation. The battery will be charged when the flight recorder is connected to a computer, the NanoPower, or a wall charger. Bluetooth is available for easy data exchange with a PDA
The housing is made of robust ABS plastic. On the right side of the unit, there are zoom buttons. Data storage is on a 4 GB solid-state disk. Flights are stored directly in the IGC format and are downloadable through a USB connection compatible with all operating systems (MS Win, Linux, and Mac OS).
W&W typically stocks LXNAV NANO4 Touch Screen IGC Flight Recorders.
Features
- High–level IGC specification
- 2048–bit digital signature
- Advanced engine noise level recording (also for JET engines)
- Automatic power down after landing (can be set by the user)
- Start logging at power on (for paragliders or pedestrians)
- Up to 30 hours with advanced power management
- Up to 20 hours of operation with screen
- Unlimited storage for flights (+28000 hours at 1 sec interval)
- Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi–Fi
- Nanoconfig program for creating declaration and system settings (for PC and Android)
- Simple signalling LED’s for logger state, battery and GPS signal
- 3.5″ sunlight readable
- 640–pixel–by–480–pixel resolution
- integrated 2800 mAh Li–Ion battery
- Up to 30 hours of operation
- Battery charger via USB port
- 56–channel GPS receiver
- High resolution variometer same technology as on V9/S80 vario
- High resolution pressure altitude sensor measures up to 16000m (~52500ft)
- Inertial platform 3 axis accelerometer and 3 axis gyroscope
- Advanced engine noise level sensor (also for JET engines)
- Plug & Play USB interface (mass storage device)
- USB compatible with all operating systems (MS Win, Linux, Mac OS)
- Serial RS232 interface with NMEA output
- Bluetooth module (Android and iOS)
- Wi–Fi module
- Built–in speaker with adjustable volume
- 4 GBytes of solid state memory
- Robust ABS plastic housing


LXNAV Cable Guide
Select the Right Cables by Referring to Our:


| Size And Weight | Height: 107 mm | Depth: 18 mm |
| Width: 70 mm | Weight: ~150 g | |
| Flight Recorder | Specification | Recording |
| High-level IGC specification | Advanced engine noise level recording (also for JET engines) | |
| 2048-bit digital signature | Automatic power down after landing (can be set by user) | |
| Start logging at power on (for paragliders or pedestrians) | ||
| Durability | Flight Storage | |
| Up to 25 hours with advanced power management | Unlimited storage for flights (+28000 hours at 1 sec interval) | |
| Up to 20 hours of operation with screen | Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi-Fi | |
| Software Support | LED Indication | |
| Nanoconfig program for creating declaration and system settings (for PC and Android) | Simple signalling LED’s for logger state, battery and GPS signal | |
| Navigation | Modes | Final Glide |
| Info | Final glide indication | |
| Flarm | MC setting | |
| Waypoint | Ballast setting | |
| Thermal | Bugs setting | |
| Setup | Polar selection | |
| Near mode | ||
| Airspace | Additional | |
| Airspace Display | Wind indication | |
| CUB compatible or from LXNAV database | Task and waypoint navigation (CUP compatible) | |
| Airports from LXNAV database | ||
| Airports from LXNAV database | ||
| Flarm | ||
| Indication of Flarm/ADSB objects | ||
| Chip | Low power ARM CPU | |
| Display | Retina touch screen | |
| 3.5-inch sunlight readable | ||
| 640-pixel-by-480-pixel resolution | ||
| Power And Battery | Integrated 2800mAh Li-Ion battery | |
| Up to 25 hours of operation | ||
| Battery charger via USB port | ||
| Sensors | 56-channel GPS receiver | |
| High resolution variometer same technology as on V9/S80 vario | ||
| High resolution pressure altitude sensor measures up to 16000m (~52500ft) | ||
| Inertial platform 3 axis accelerometer and 3 axis gyroscope | ||
| Advanced engine noise level sensor (also for JET engines) | ||
| Connections | Plug & Play USB interface (mass storage device) | |
| USB compatible with all operating systems (MS Win, Linux, Mac OS) | ||
| Serial RS232 interface with NMEA output | ||
| Bluetooth module (Android and iOS) | ||
| Wi-Fi module | ||
| Speaker | Built-In speaker with adjustable volume | |
| Buttons | 1 x Power ON | |
| 2 x Zoom | ||
| 4 x Screen | ||
| Storage | 4 GBytes of solid state memory | |
| Material | Robust ABS plastic housing |
- A NANO4 flight recorder with a preloaded NanoConfig program and a user manual which is loaded on the USB stick
- A MicroUSB cable
- A Wall charger with a Micro USB plug
- A Level converter (only with NANO4 units up to serial number 06099) (green, shrinkwrapped USB adapter)
- A Barogram calibration chart
- Nano4 Mount
- Nano Power Cable for Nano 3/4
- Wall Charger Micro USB Wall Charger for Nano, Nano4
- NP-OUDIE Nano Cable for Oudie (Nano power with Oudie Mini USB Connection.)
- NANOPOWER-FL Nano cable for FLARM (Nano power with FLARM RJ11 connector - supplied from flarm side.)
- NANOPOWER-PF Nano Cable for Power Flarm (Nano power with power flarm RJ45 -supplied from flarm side.)
- S7-GPS-NANO S7 Vario GPS Cable for Nano
Compare and Decide
| NANO | NANO3 | NANO4 | |
![]() |
![]() |
![]() |
|
| Screen | No Screen | 2.0″ Diagonal 1.6x1.2″ (41x30.5 mm) Area: 1251 mm² pixels: 320x240 |
3.5″ Diagonal 2.1x2.8″ (53x71mm) Area: 3763 mm² pixels: 480x640 |
| Dimensions | 60x40x20 mm (2.36x1.57x0.79″) |
65x42x22 mm (2.6x1.7x0.9″) |
65x105x17 mm (2.6x4.1x0.7″) |
| Battery Life (Hours) | 35 | 13 to 25 | 14 to 36 |
| IGC Approved GPS Flight Recorder | ![]() |
![]() |
![]() |
| Variometer using built-in pressure sensor | ![]() |
![]() |
|
| Moving map with airports, airspace & tasks | ![]() |
![]() |
|
| Final Glide to selected airport and around a task | ![]() |
![]() |
|
| Reachable Airports Highlighted on Map | ![]() |
||
| Detailed map with terrain, cities, lakes, rivers, etc. |
North Up Only |
||
| Elevation Database – can display AGL altitude | ![]() |
||
| Receives and Displays FLARM traffic from connected FLARM |
![]() |
![]() |
|
| Receives and Displays ADS–B traffic from connected PowerFLARM |
![]() |
![]() |
|
| Receives and Displays PCAS transponder traffic from connected PowerFLARM |
![]() |
![]() |
|
| Edit settings in PowerFLARM | ![]() |
![]() |
|
| Thermal Assistant | ![]() |




























