LXNAV Nano4 Flight Recorder
Manufacturer Part Number: Nano4
LXNAV Nano4
Touchscreen IGC Flight Recorder
General Description
LXNAV Nano4 is the first retina touchscreen flight recorder from the NANO series. Fly without any cables and chargers! A 2800mAh battery serves up to 25h with advanced power management. The Nano4 has 7 buttons for easy handling in turbulent air. All handling can be done via the Touchscreen or these 7 buttons.
The NANO4 flight recorder is the smallest flight recorder designed in accordance with the IGC "All Flights" specification. It has IGC approval level 1 for all flights including world records. It features an integrated 56-channel GPS receiver with a built-in antenna, an altitude sensor, an ENL sensor, a security micro-switch, a Bluetooth module, a Wi-Fi module and a 2800 mAh
battery
The built-in battery allows up to 36 hours of stand-alone operation. The battery will be charged when the flight recorder is connected to a computer, the NanoPower or a wall charger. Bluetooth is available for easy data exchange with a PDA
The housing is made of robust ABS plastic. On the right side of the unit, there are zoom buttons. Data storage is on a 4 GB solid-state disk. Flights are stored directly in the IGC format and are downloadable through a USB connection compatible with all operating systems (MS Win, Linux and Mac OS).
W&W typically stocks LXNAV Nano4.
Features
- High–level IGC specification
- 2048–bit digital signature
- Advanced engine noise level recording (also for JET engines)
- Automatic power down after landing (can be set by the user)
- Start logging at power on (for paragliders or pedestrians)
- Up to 30 hours with advanced power management
- Up to 20 hours of operation with screen
- Unlimited storage for flights (+28000 hours at 1 sec interval)
- Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi–Fi
- Nanoconfig program for creating declaration and system settings (for PC and Android)
- Simple signalling LED’s for logger state, battery and GPS signal
- 3.5″ sunlight readable
- 640–pixel–by–480–pixel resolution
- integrated 2800 mAh Li–Ion battery
- Up to 30 hours of operation
- Battery charger via USB port
- 56–channel GPS receiver
- High resolution variometer same technology as on V9/S80 vario
- High resolution pressure altitude sensor measures up to 16000m (~52500ft)
- Inertial platform 3 axis accelerometer and 3 axis gyroscope
- Advanced engine noise level sensor (also for JET engines)
- Plug & Play USB interface (mass storage device)
- USB compatible with all operating systems (MS Win, Linux, Mac OS)
- Serial RS232 interface with NMEA output
- Bluetooth module (Android and iOS)
- Wi–Fi module
- Built–in speaker with adjustable volume
- 4 GBytes of solid state memory
- Robust ABS plastic housing
LXNAV Cable Guide
Select the Right Cables by Referring to Our:
LXNAV Nano4 price varies depending on selection.
Use above dropdown box for selections and final price.
Size And Weight | Height: 107 mm | Depth: 18 mm |
Width: 70 mm | Weight: ~150 g | |
Flight Recorder | Specification | Recording |
High-level IGC specification | Advanced engine noise level recording (also for JET engines) | |
2048-bit digital signature | Automatic power down after landing (can be set by user) | |
Start logging at power on (for paragliders or pedestrians) | ||
Durability | Flight Storage | |
Up to 25 hours with advanced power management | Unlimited storage for flights (+28000 hours at 1 sec interval) | |
Up to 20 hours of operation with screen | Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi-Fi | |
Software Support | LED Indication | |
Nanoconfig program for creating declaration and system settings (for PC and Android) | Simple signalling LED’s for logger state, battery and GPS signal | |
Navigation | Modes | Final Glide |
Info | Final glide indication | |
Flarm | MC setting | |
Waypoint | Ballast setting | |
Thermal | Bugs setting | |
Setup | Polar selection | |
Near mode | ||
Airspace | Additional | |
Airspace Display | Wind indication | |
CUB compatible or from LXNAV database | Task and waypoint navigation (CUP compatible) | |
Airports from LXNAV database | ||
Airports from LXNAV database | ||
Flarm | ||
Indication of Flarm/ADSB objects | ||
Chip | Low power ARM CPU | |
Display | Retina touch screen | |
3.5-inch sunlight readable | ||
640-pixel-by-480-pixel resolution | ||
Power And Battery | Integrated 2800mAh Li-Ion battery | |
Up to 25 hours of operation | ||
Battery charger via USB port | ||
Sensors | 56-channel GPS receiver | |
High resolution variometer same technology as on V9/S80 vario | ||
High resolution pressure altitude sensor measures up to 16000m (~52500ft) | ||
Inertial platform 3 axis accelerometer and 3 axis gyroscope | ||
Advanced engine noise level sensor (also for JET engines) | ||
Connections | Plug & Play USB interface (mass storage device) | |
USB compatible with all operating systems (MS Win, Linux, Mac OS) | ||
Serial RS232 interface with NMEA output | ||
Bluetooth module (Android and iOS) | ||
Wi-Fi module | ||
Speaker | Built-In speaker with adjustable volume | |
Buttons | 1 x Power ON | |
2 x Zoom | ||
4 x Screen | ||
Storage | 4 GBytes of solid state memory | |
Material | Robust ABS plastic housing |
- A NANO4 flight recorder with a preloaded NanoConfig program and a user manual which is loaded on the USB stick
- A MicroUSB cable
- A Wall charger with a Micro USB plug
- A Level converter (only with NANO4 units up to serial number 06099) (green, shrinkwrapped USB adapter)
- A Barogram calibration chart
- Nano4 Mount
- Nano Power Cable for Nano 3/4
- Wall Charger Micro USB Wall Charger for Nano, Nano4
- NP-OUDIE Nano Cable for Oudie (Nano power with Oudie Mini USB Connection.)
- NANOPOWER-FL Nano cable for FLARM (Nano power with FLARM RJ11 connector - supplied from flarm side.)
- NANOPOWER-PF Nano Cable for Power Flarm (Nano power with power flarm RJ45 -supplied from flarm side.)
- S7-GPS-NANO S7 Vario GPS Cable for Nano
Compare and Decide
Nano | Nano3 | Nano4 | |
Screen | No Screen | 2.0″ Diagonal 1.6x1.2″ (41x30.5 mm) Area: 1251 mm² pixels: 320x240 |
3.5″ Diagonal 2.1x2.8″ (53x71mm) Area: 3763 mm² pixels: 480x640 |
Dimensions | 60x40x20 mm (2.36x1.57x0.79″) |
65x42x22 mm (2.6x1.7x0.9″) |
65x105x17 mm (2.6x4.1x0.7″) |
Battery Life (Hours) | 35 | 13 to 25 | 14 to 36 |
IGC Approved GPS Flight Recorder | |||
Variometer using built-in pressure sensor | |||
Moving map with airports, airspace & tasks | |||
Final Glide to selected airport and around a task | |||
Reachable Airports Highlighted on Map | |||
Detailed map with terrain, cities, lakes, rivers, etc. |
North Up Only |
||
Elevation Database – can display AGL altitude | |||
Receives and Displays FLARM traffic from connected FLARM |
|||
Receives and Displays ADS–B traffic from connected PowerFLARM |
|||
Receives and Displays PCAS transponder traffic from connected PowerFLARM |
|||
Edit settings in PowerFLARM | |||
Thermal Assistant |