LXNAV SxHAWK
LXNAV SxHAWK
HAWK Vario Stand-Alone
General Description
LXNAV SxHAWK - The first stand-alone HAWK variometer is now available in 57mm and 80mm, featuring an IGC-certified flight recorder, Bluetooth connectivity, and a backup battery.
The LXNAV SxHAWK has both GPS/FLARM and PDA/PNA input/output. The unit has standard dimensions that will fit into a glider panel with an opening of 80 mm diameter (3.15”) or 57 mm diameter. It is also able to supply a PDA/PNA with power (5VDC/1A). The unit has an integrated high precision digital pressure sensor and inertial platform. The sensors are sampled more than 100 times per second. Real Time Data is displayed via a vario needles, up to 4 variable numeric fields displayed on a QVGA 320x240 pixel, 3.5-inch (SxHAWK 80mm) or 2.5-inch (SxHAWK), high brightness (1200 nits) colour display. To adjust values and settings the LXNAV SxHAWK has two rotary push button knobs and three additional push buttons.
- An extremely bright 3.5’’ (SxHAWK 80MM) or 2.5” (SxHAWK) QVGA color display readable in all sunlight conditions with the ability to adjust the backlight.
- Two rotary switches (knobs) with push button function and three push buttons are used for input.
- Pre-loaded polar database for nearly all gliders.
- GPS/FLARM and PDA/PNA input/output.
- FLARM Indication if a FLARM is connected to the GPS/FLARM port.
- Programmable “needles” for selectable data such as netto vertical speed, relative (super netto) and vertical speed (vario).
- 320x240 pixels color screen for additional information such as average, thermal vario, time, speed etc…
- Many custom audio settings.
- 100Hz sampling rate for very fast response.
- Speed to fly indication.
- TE compensation can be selected to be either pneumatic TE probe or electronic TE.
- Audio equalizer, for custom vario sound performance.
- Audio thermal assistant.
- Built-in high level, IGC-approved flight recorder.
- Built-in Bluetooth module.
- Backup battery.
- Engine noise level sensor (ENL).
- Built-in GPS module.
- LXNAV SxHAWK Main Unit
- Main Power Cable for SxHAWK + CAN Terminator
- Speaker
- Flarm Cable (optional)
- PDA Cable (optional)
- 2x6 mm Screw
- Bluetooth Antenna
- GPS Antenna
- Barogram Calibration Chart
| S3 | S7 | S8/S80 | S10/S100 | SxHAWK | |
| Internal Platform | - |  |
|
|
|
| Digital Needle | - | - | |
|
|
| HAWK | - | - | - | Optional | |
| Cut-Out Size | 57/80mm | 57/80mm | 57/80mm | 57/80mm | 57/80mm |
| Standalone | |
|
|
|
|
| LX80xx/LX90xx Compatability | - | - | - | - | |
| Internal Battery | - | - | - | |
|
| Possible Electronic Compensation | - | |
|
|
|
| Bluetooth | - | Optional | Optional | |
|
| Task Mode | - | - | |
|
|
| WPT Mode | - | - | |
|
|
| AHRS Mode | - | - | Optional | Optional | |
| FLARM Display | - | |
|
|
|
| Club Option | - | - | |
- | |
| SD Card | - | - | |
|
|
| PDA Port | - | - | |
|
|
| IGC Flight Recorder | - | - | - | |
|
| GPS Module | - | - | - | |
|
The LXNAV SxHAWK can be expanded with one or more repeaters via the CAN bus. This allows both pilots in a two-seat glider to have independent control of all functions of each unit in the front or the rear seat.
The SxHAWK unit includes a built-in IGC-approved flight recorder, a Bluetooth module and its own backup battery which provides from 3 to 4.5 hours of independent operation.
