LXNAV G-Meter
LXNAV G-Meter
Intuitive Standalone Digital G-Meter
General Description
LXNAV G-Meter - indicates and logs g-forces with an integrated high precision digital pressure sensor and inertial platform. Available in 57 mm and 80mm diameter.
The LXNAV g-meter is a standalone unit designed to measure, indicate and log g-forces. The unit has standard dimensions that will fit into the instrument panel with an opening of 57 or 80 mm diameter. The unit has an integrated high precision digital pressure sensor and inertial system. The sensors are sampled more than 100 times per second. Real Time Data is displayed on a QVGA 320x240 pixel 2.5-inch (57mm) or 3.5" (80mm) high brightness color display. To adjust values and settings the LXNAV g-meter has three push buttons.
Features
- An extremely bright 2.5" (57mm) or 3.5" (80mm) QVGA color display readable in all sunlight conditions with the ability to adjust the backlight
- 320x240 pixels color screen for additional information such as minimum and maximum g-force
- Three push buttons are used for input
- G-force up to +-16G
- Built-in RTC (Real time clock)
- Logbook
- 100 Hz sampling rate for very fast response.
LXNAV G-Meter price varies depending on selection.
Use above dropdown box for selections and final price.
Size and Weight 57 mm | Height: 61 mm Width: 61 mm |
Depth: 48 mm Weight: ~200 g |
Size and Weight 80 mm | Height: 81 mm Width: 81 mm |
Depth: 53 mm Weight: ~270 g |
Flight Recorder | Specification | |
Built-in RTC (Real time clock) | Flight Storage | |
Unlimited storage for flights (+28000 hours at 1 sec interval) | ||
Flights stored in IGC file format are downloadable on SD card. | ||
Chip | ARM Cortex-M4 160MHz | |
Display | 2.5-inch sunlight readable | |
16 bit color display | ||
1200 cd brightness | ||
320-pixel-by-240-pixel resolution | ||
ALS – ambient light sensor | ||
Sensors | High resolution airspeed sensor | |
Inertial platform 3 axis accelerometer (+-16g) and 3 axis gyroscope | ||
Connections | Serial port input/output on RS232 level (standard IGC 6 pin connector RJ11) | |
Micro SD card | ||
Buttons | 3 x Push buttons | |
Storage | 2 GBytes of internal memory | |
Integrated SD card reader | ||
Consumption | At 12V (power input 8-32V) | |
90 mA – 140 mA | ||
Material | Aluminum housing | |
Circuit Breaker | 1 Amp |
- LXNAV g-Meter
- Power supply cable
- Calibration chart by MIL-A-5885 paragraph 4.6.3 (Optional)
LXNAV Cable Guide
Select the right cable by referring to our: