TOST Hydraulic Fittings
TOST Hydraulic Fittings
General Description
TOST Hydraulic Fittings - For the connection of hydraulic components (master cylinder, brake assembly, etc.) or the relevant hydraulic hoses, so-called connection fittings or male stud couplings are required. We offer suitable connectors for all our hydraulic components to join the hydraulic hoses. TOST is pleased to give you advice at any time to select the correct fitting for your brake system.
TOST Hydraulic Fitting price varies depending on selection. Use above dropdown box for selections and final price.
Connecting Fittigs JIC03
Connecting Fittings From Aluminium, One-Sided With Standard Screwing JIC03
|
P/N SKU |
Desc |
Thread Size 1 |
Thread Size 2 |
Thread Size 3 |
Form |
|
075850 5252 |
Fitting straight NPT 1/8′′-JIC03 |
JIC03 | NPT 1/8′′ | N/A | straight |
|
075851 5250 |
Fitting 45° NPT 1/8′′-JIC03 |
JIC03 | NPT 1/8′′ | N/A | 45° |
|
075853 5249 |
Fitting 90° NPT 1/8′′-JIC03 |
JIC03 | NPT 1/8′′ | N/A | 90° |
|
058050 5248 |
Fitting straight M10x1-JIC03 |
JIC03 | M10x1 | N/A | straight |
|
058051 5247 |
Fitting 45° M10x1-JIC03 |
JIC03 | M10x1 | N/A | 45° |
|
058053 5246 |
Fitting 90° M10x1-JIC03 |
JIC03 | M10x1 | N/A | 90° |
|
058058 5245 |
T-Fitting JIC03 | JIC03 | JIC03 | JIC03 | T-Fitting |
Connecting Fittings JIC04
From Aluminium, Ene-Sided With Standard Screwing JIC04
|
P/N SKU |
Desc |
Thread Size 1 |
Thread Size 2 |
Thread Size 3 |
Form |
|
075830 6166 |
Fitting straight NPT 1/8′′-JIC04 |
JIC04 | NPT 1/8′′ | N/A | straight |
|
075831 6169 |
Fitting 45° NPT 1/8′′-JIC04 |
JIC04 | NPT 1/8′′ | N/A | 45° |
|
075833 5244 |
Fitting 90° NPT 1/8′′-JIC04 |
JIC04 | NPT 1/8′′ | N/A | 90° |
|
058054 5242 |
Fitting straight M10x1-JIC04 |
JIC04 | M10x1 | N/A | straight |
|
058055 5241 |
Fitting 45° M10x1-JIC04 |
JIC04 | M10x1 | N/A | 45° |
|
058056 5240 |
Fitting 90° M10x1-JIC04 |
JIC04 | M10x1 | N/A | 90° |
|
075838 5239 |
T-Fitting JIC04 | JIC04 | JIC04 | JIC04 | T-Fitting |
|
058052 |
T-Fitting JIC03 |
Hydraulic Reductions From Aluminium
|
P/N SKU |
Desc |
Thread Size 1 |
Thread Size 2 |
Thread Size 3 |
Form |
|
058063 5238 |
Hydraulic reduction M10x1-M5 |
M5 | M10x1 | N/A | straight |
|
058064 5237 |
Hydraulic reduction M10x1-M6 |
M6 | M10x1 | N/A | straight |
Hollow Screws
For the connection of hydraulic hoses and hydraulic components, hollow scews are
a very good choice. The angle between hose and axis of the hollow screw is to be
defined freely.
|
P/N SKU |
Desc |
Conn Thread |
Application | Gasket |
|
058227 5236 |
Hollow screw M5x14 |
M5 | BZM | 2 x O-ring included in p/n 058227 |
|
058226 5234 |
Doube hollow screw M5x21 |
M5 | BZM | 2 x O-ring included in p/n 058226 |
|
058062 5233 |
Hollow screw M6 | M6 | Hydraulic hose 06 | 2 x Cu gasket, included in p/n 058062 |
|
058550 6137 |
Hollow screw M10 | M10x1 | Standard hydraulic hose p/n 058330, 058350, 058360, 058375, 058380, 058390, 058310 |
2 x Cu gasket, included in p/n 058550 |
|
058281 5232 |
Hollow screw M10 VA | M10x1 | Stahlfl ex hydraulic hose and Stahlfl ex hydraulic hose lightweight p/n 058001, 058002 |
2 x Aluminium gasket, included in p/n 058281 |
|
058282 5231 |
Hollow screw M10 double VA |
M10x1 | Stahlfl ex hydraulic hose and Stahlfl ex hydraulic hose lightweight p/n 058001, 058002 |
3x Aluminium gasket, included in p/n 058282 |
Suitable Banjo Fittings
|
P/N SKU |
Desc | App | Remarks |
|
058224 5230 |
Banjo bolt M5 | Hydraulic hose-05, p/n 058236, hollow screw M5, 058226/058227/058237 |
incl.cutting ring and spigot nut |
|
058060 5228 |
Banjo fitting M6 | hydraulic hose-06 | incl. hollow screw |
|
058257 |
Banjo Filling M6 | For Cutting RIng | With Hollow Screw |
|
058003 5227 |
Banjo M10 | Hydraulic hose-03, p/n 058001, hollow screw M10x1, p/n 058281/058282 |
incl. cutting ring and spigot nut |
Suitable washers as spare parts
|
P/N SKU |
Desc | App |
|
058238
|
O-Ring | for hollow screw M5 |
|
058283 5226 |
Copper gasket M10 | for hollow screw p/n 058550 |
|
058286 5225 |
Copper gasket M6 | for hollow screw p/n 058062 |
|
058289 5223 |
Aluminium gasket M10 | for hollow screw p/n 058550, 058281, 058282 |
Remarks: Gaskets (from aluminium or copper) may be used only once!
Male Stud Connectors
a further option for the connection of hydraulic components are copper pipes.
|
P/N SKU |
Desc |
|
058695 5221 |
Cu Pipe From Copper 6X1 PER METER |
|
058691 5220 |
From Steel - 5m |
The connection of copper pipes to the hydraulic component is done with male stud
couplings.
Male Stud Connectors
|
P/N SKU |
Desc | Form |
Conn Thread 1 |
Conn Thread 2 |
Remarks |
|
058630 5219 |
C1 | Straight | NPT 1/8" | M10X1 | with spigot nut and cutting ring |
|
058640 5218 |
C2 | 90° | NPT 1/8" | M10X1 | with spigot nut and cutting ring |
|
056870 5217 |
C3 | Straight | M10x1 taper thread | M10X1 | with spigot nut and cutting ring |
|
058680 5216 |
C4 | 90° | M10x1 taper thread | M10X1 | with spigot nut and cutting ring |
|
058651 5215 |
C5 | Straight | M10x1 | M10X1 | with copper gaskets, for connection of Master cylinder model 7 with reservoir |
|
058699 |
Cutting Ring for All Connectors | ||||
|
058698 |
Spigot Nut |
To interconnect copper pipes or copper pipes with hydraulic hoses:
straight couplings or T-couplings are the correct type of connector.
| P/N | Desc |
Conn Thread 1 |
Conn Thread 2 |
Conn Thread 3 |
Remarks |
|
058620 5211 |
Straight coupling | M10x1 | M10x1 | with spigot nut and cutting ring | |
|
058610 5212 |
T-Coupling | M10x1 | M10x1 | M10x1 | with spigot nut and cutting ring |
Assembly notes for male stud couplings
(p/n 058630, 058640, 058670, 058680)
- Cut off pipe at right angle (do not use pipe cutter)
- Debur pipe on the inside and outside (caution: do not bevel)
- Lightly lubricate thread and cone of male stud coupling
- Lubricate cutting ring and spigot nut (on inside)
- Push spigot nut and cutting ring over pipe end
- Tighten spigot nut by hand
- Push pipe against stop of inner cone
- A mark on the spigot nut helps to check on the correct number of turns
- Turn spigot nut approx. 11⁄2 turns (pipe must remain stationary). The tightening force increases with pressure against the stop face
Check:
- Release spigot nut and check weather visible bead fills space in front of the cutting ring face. If not, tighten spigot nut more.
- Cutting ring may turn, but may not be able to move in axial direction.
As completion of our disk brake wheels we can offer brake assemblies, master cylinders and hydraulic equipment, fitting to all our wheel dimensions. With the various hydraulic components it is possible to generate a hydraulic brake system, which combines the highest level of safety, the maximum of braking torque, a long-life cycle and easy maintenance. The varying hydraulic components are described in the following, grouped according to their mode of operation. Furthermore, the possible combinations of the various brake components are described. Of course, we provide you with advise in the lay-up of a hydraulic brake system. In the same manner our Service Department will assist you, if there are any questions regarding one of our brake components or the whole hydraulic brake system. For all hydraulic brake components Technical Specifications and installation drawings are available.
W&W typically stocks the items highlighted in yellow in the "Tech Data" table. All other parts please allow approximately 4 weeks for delivery.
Always use TOST Tires and Tubes when available.
See "Tech Data" tab for Description and Technical Data.
See "Docs" tab for "TOST Tire, Tube & Wheel Selection Guide".
