LXNAV Nano3 IGC Flight Recorder

SKU
5574
In stock
$650.00
-
+
Overview

LXNAV Nano3 IGC Flight Recorder

Manufacturer Part Number: NANO3

LXNAV Nano3

General Description

LXNAV NANO3 is the smallest IGC flight recorder with a QVGA screen. Fly without any cables and chargers! A 1800mAh battery serves up to 36h with advanced power management. The Nano3 has 4 push buttons for easy editing and a rocker button for setting volume/zoom and MacCready.

The built-in battery allows up to 25 hours of stand-alone operation. The battery can be charged when the flight recorder is connected to a computer, NanoPower or wall charger. Bluetooth is used for easy data exchange with a PDA.

The housing is made of robust ABS plastic. On the left side of the unit, there is a rocker button and five status LEDs which display the operational status. A 4 GB solid state disk is used for flight data storage. Flights are stored directly in IGC format and are downloadable through a USB connection which is compatible with all operating systems (MS Win, Linux and Mac OS).

At the back of the unit, there is a mini USB connector which is used for charging and data transfer. The internal solid-state disk is preloaded with the NanoConfig program. This program is used for uploading a flight declaration and/or changing the settings of the NANO3. Flight declarations can also be uploaded using a serial interface cable or Bluetooth connection.

W&W typically stocks LXNAV Nano3.

Features

  • High–level IGC specification
  • 2048–bit digital signature
  • Advanced engine noise level recording (also for JET engines)
  • Automatic power down after landing (can be set by the user)
  • Start logging at power on (for paragliders or pedestrians)
  • Up to 35 hours with advanced power management
  • Up to 16 hours of operation with screen
  • Unlimited storage for flights (+28000 hours at 1 sec interval)
  • Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi–Fi
  • NanoConfig program for creating declaration and system settings (for PC and Android)
  • Simple signaling LED’s for logger state, battery and GPS signal
  • 2″ sunlight readable
  • 340–pixel–by–240–pixel resolution
  • 262144 Colors
  • Integrated 1800 mAh Li–Ion battery
  • Up to 36 hours of operation
  • Battery charger via USB port
  • 56–channel GPS receiver
  • High resolution variometer same technology as on V9/S80 vario
  • High resolution pressure altitude sensor measures up to 16000m (~52500ft)
  • Inertial platform 3 axis accelerometer and 3 axis gyroscope
  • Advanced engine noise level sensor (also for JET engines)
  • Plug & Play USB interface (mass storage device)
  • USB compatible with all operating systems (MS Win, Linux, Mac OS)
  • Serial RS232 interface with NMEA output
  • Bluetooth module (Android and iOS)
  • Integrated Bluetooth LE4 device (SPP)
  • Built–in speaker with adjustable volume
  • 4 GBytes of solid state memory
  • Robust ABS plastic housing
     
 Size And Weight  Height: 66 mm Depth: 28 mm
  Width: 43 mm  Weight: ~76 g 
Flight Recorder  Specification Recording
  High-level IGC specification Advanced engine noise level recording (also for JET engines)
  2048-bit digital signature  Automatic power down after landing (can be set by user)
    Start logging at power on (for paragliders or pedestrians)
  Durability Flight Storage
  Up to 35 hours with advanced power management Unlimited storage for flights (+28000 hours at 1 sec interval)
  Up to 16 hours of operation with screen
 
Flights stored in IGC file format are downloadable through USB, Bluetooth or Wi-Fi
  Software Support LED Indication
  Nanoconfig program for creating declaration and system settings (for PC and Android)  Simple signalling LED’s for logger state, battery and GPS signal 
Navigation  Modes Final Glide
  Info Final glide indication
  Flarm MC setting
  Waypoint Ballast setting
  Thermal Bugs setting
  Setup Polar selection
  Near mode   
  Airspace Additional
  Airspace Display Wind indication
  CUB compatible or from LXNAV database  Task and waypoint navigation (CUP compatible)
    Airports from LXNAV database
    Select among many navboxes
  Flarm  
  Indication of Flarm/ADSB objects   
Chip   ARM Cortex M4 CPU   
Display Retina display  
  2.0-inch sunlight readable  
  340-pixel-by-240-pixel resolution  
  262144 Colors   
Power And Battery  Integrated 1800 mAh Li-Ion battery  
  Up to 36 hours of operation  
Sensors 56-channel GPS receiver  
  High resolution variometer same technology as on V9/S80 vario  
  High resolution pressure altitude sensor measures up to 16000m (~52500ft)  
  Inertial platform 3 axis accelerometer and 3 axis gyroscope  
  Advanced engine noise level sensor (also for JET engines)
 
 
Connections Plug & Play USB interface (mass storage device)  
  USB compatible with all operating systems (MS Win, Linux, Mac OS)  
  Serial RS232 interface with NMEA output  
  Bluetooth module (Android and iOS)  
  Integrated Bluetooth LE4 device (SPP)   
Speaker  Built-in speaker with adjustable volume   
Buttons  1 x Push and lever  
  4 x Navigation   
Storage 4 GBytes of solid state memory   
Material  Robust ABS plastic housing   
  • NANO3 flight recorder with preloaded NanoConfig program and user manual which is loaded on the USB stick
  • NanoPower cable
  • USB cable
  • Wall charger
  • Barogram calibration chart
  • Quick reference char
  • Nano Power - Nano power cable for Nano, Nano3/4
  • Nano Wall Mini for Nano3
  • NANOBAT - Nano3 Battery
  • NP-Oudie - Nano cable for Oudie (Nano power with Oudie mini USB connection)
  • NANOPOWER-FL - Nano cable for Flarm (Nano power with FLARM RJ11 connecto - supplied from flarm side)
  • NANOPOWER-PF - Nano cable for Power Flarm (Nano powe with Power Flarm RJ45 connector - supplied from flarm side)
  • S7-GPS-NANO - S7 Vario GPS cable for Nano
  • Nano3mount - Mount for Nano 3

Compare and Decide

  Nano Nano3  Nano4
 
Screen  No Screen 2.0″ Diagonal
1.6x1.2″ (41x30.5 mm)
Area: 1251 mm²
pixels: 320x240
3.5″ Diagonal
2.1x2.8″ (53x71mm)
Area: 3763 mm²
pixels: 480x640
Dimensions 60x40x20 mm
(2.36x1.57x0.79″)
65x42x22 mm
(2.6x1.7x0.9″)
65x105x17 mm
(2.6x4.1x0.7″)
Battery Life (Hours) 35 13 to 25 14 to 36
IGC Approved GPS Flight Recorder
Variometer using built-in pressure sensor  
Moving map with airports, airspace & tasks  
Final Glide to selected airport and around a task  
Reachable Airports Highlighted on Map    
Detailed map with terrain, cities, lakes, rivers, etc.    

North Up Only

Elevation Database - can display AGL altitude  
Receives and Displays FLARM traffic from connected FLARM  
Receives and Displays PCAS transponder traffic from connected PowerFLARM  
Edit settings in PowerFLARM  
Thermal Assistant    

Write Your Own Review
You're reviewing:LXNAV Nano3 IGC Flight Recorder
We found other products you might like!