Icom IC-A220 VHF Airband Panel Mount Transceiver

General Description

Icom IC-A220 VHF Airband Panel Mount Transceiver - features an innovative, easy to read OLED display. It provides higher contrast, wider viewing angle of almost 180 degrees, and faster response time than a conventional LCD. The most frequently used FLIP-FLOP (Frequency exchange) switch button is designed large enough to be pushed with ease. Adjustable audio level and squelch control functions are also featured.

The IC-A220 also has a built-in voice-activated intercom function allowing the pilot to talk with the copilot via the headset. Additionally, the IC-A220 has 20 memory channels and 20 history memory channels respectively. Often used memory channels can be instantly recalled. Group memory channels are organized into 10 memory channels by five groups (total 50 channels). Weather channel scanning function searches for weather channel signals. 

When combined with the IC-A220, the optional PS-80 power supply provides a convenient base station operation on the ground.

This version includes the panel mounting tray and install kit.

  • Bright and easy to read organic light-emitting diode (OLED) display
  • Wide 170-degree viewing angle with auto dimmer function
  • The ""flip-flop"" arrow button allows for easy channel switching
  • Auto stack memory makes it easier to recall the last 20 channels used
  • Automatic or manual squelch operation
  • Built-in DC-DC converter accepts a 12/24V DC power source f
  • Build-in, voice-activated intercom function
  • Industry-standard, 25-pin D-sub connector
  • 20 regular memory channels with a 6-character channel name
  • 50 group memory channels (10 Ch x 5) groups with a channel tag
  • Automatic weather channel scanning and receive (USA version only)
  • Dualwatch and priority functions
  • One-touch access to 121.5 MHz emergency frequency
  • Sidetone function for monitoring your voice with headset
  • ANL (automatic noise limiter) function reduces pulse-type noise
  • Remote control capability
  • Dial lock and panel lock
  • Time-out timer
  • D-sub 25-pin industry-standard connector for easy installation
  • Slim 1.34 inch (34 mm) height can be installed in a limited panel space
  • Two types of menu mode: settings menu and configuration menu
   
Weight 1.0 kg (2.2 lb)
Dimensions 160 x 34 x 271 mm (6.3 x 1.34 x 10.67 in)
Power requirements 13.8 VDC, 27.5 VDC (negative ground)
Frequency Coverage Tx/Rx:
8.33 kHz spacing: 118.000  to 136.992 MHz
25 kHz spacing: 118.000 to 136.975 MHz
Rx Wx:
161.650 to 163.275 MHz
Mode AM (6K00A3E, 5K60A3E)
Frequency spacing 8.33 kHz/25 kHz
Frequency stability ±5 ppm
Operating Temperatures -20°C to 55°C
Antenna Impedance 50Ω
No. of memory channels 20 regular memory
50 group memory
10 GPS
10 Weather
20 auto stack memory
TRANSMITTER  
Output Power 8 watts, typical (carrier power)
Spurious Emissions -60 dBc
Modulation Limiting 70% (maximum 98%)
Microphone Impedance 600Ω
Intermediate Frequencies 38.85 MHz / 450 kHz (1st/2nd)
Selectivity 25 kHz spacing: ±3kHz/±22 kHz (6dB/60dB)
8.33 kHz spacing: ±2.778 kHz/±7.37 kHz (6 dB/60 dB)
Spurious Rejection more than 74 dBµ
Audio Output Power External SP: 5W with 4Ω load
Headphone: 60 mW with 500Ω load
Write Your Own Review
You're reviewing:Icom IC-A220 VHF Airband Transceiver Panel Mount
We found other products you might like!