f.u.n.k.e. Avionics FSG8 VHF Mobile Transceiver
Manufacturer Part Number: F10800
f.u.n.k.e. FSG8 VHF Mobile Transceiver
General Description
f.u.n.k.e. FSG8 VHF Mobile Transceiver - is the successor of the well-known “yellow briquettes” FSG4 and FSG5 and complies with the reduced channel separation of 8.33 kHz.
Transmitter and receiver of the FSG8 handheld radio are derived from the proven ATR model series. These have been thoroughly redesigned to meet the demanding requirements for a certification as a ground-based handheld VHF transceiver for aeronautical mobile services.
The FSG8 has the same housing as its predecessor and is, therefore, just as robust. All accessories of the previous models FSG4/5 can be used with the model FSG8.
- VFH/AM handheld transceiver for ATC
- Robust aluminium die-cast housing
- Side-tone via headphone
- Battery indicator
- 760 / 2278 channels selectable
- Satisfies equipage requirement for 8.33 kHz channel spacing
- Transmit power 1,5 Watt / 5.0 Watt PEP
- Numerous accessories: external microphone, carrying case, charger, 12 VDC supply cable, ...
- Tested acc. to ETSI EN 300676-1/2
- Certification as ground-based VHF hand-held radio transmitter for the VHF aeronautical mobile service
Frequency Range | 118,000 … 136,975 MHz |
Channel Spacing | 25 kHz/8.33 kHz |
Number of Channels | 760 (25 kHz)/2278 (8,33 kHz) |
frequency accuracy | ≤ ± 1 ppm |
RF Carrier Output | 1,5 Watt/50Ω (5,0W PEP) @ 12V typ. |
AF output power | 0,7 Watt/8Ω @ 12V |
Sensitivity | < -103 dBm (m=0,3 / 12 dB SINAD) |
AGC Range | ≤ 6 dB/10μV … 10 mV |
Microphone Threshold Voltage (m=0,85) | 1,1 mV |
/supply voltage | 14,0 V … 17,0 V external |
Built-in Battery | NiMH-Akku 12 V/1,5 Ah nominal |
Operating Time | 17 hours @ 40 % Rx/60 % standby |
Operating Temperature With Accupack E51833 | -10° C … +55° C/14°F - 130° F |
Dimensions (Without Antenna) | 209 × 84 × 44,5 mm |
Weight | ca. 810 g/1,8 lbs |
Tested acc. to |
ETSI EN 300 676-1 V1.5.2 ETSI EN 300 676-2 V2.1.1 |
Certification | BAF D-0061/2019 |
-
FSG8 handheld radio (ZF10800)
-
Nickel Metal Hydride Battery (E51388)
-
Antenna (E51359)
-
Declaration of Conformity (CoC)
-
Manual
-
Please note that no charger is included in the delivery and must therefore be ordered separately
(FSG4/5 chargers can usually be used)
You can choose between two different chargers:
- the simple plug-in charger (F10059) without charge level indicator and
- the automatic charger DL-5A (F10198) with charge level indicator