3M™ Perfect-It™ Rubbing Compound Step 1

3M™ Perfect–It™ Rubbing Compound Step 1

General Description

Use 3M™ Perfect–It™ Rubbing Compound annually to enhance your sailplane finish. The rubbing compound is designed to remove grade P1200 and finer sand paper scratches. However, we recommend finishing with 1500 grit wet sandpaper before starting with the rubbing compound. Be sure to follow up with Wings & Wheels WX Seal &Block for the ultimate in gel coat preservation.

3™ Perfect–It™ Rubbing Compound combines strength and finesse, removing fine scratches and defects. It was originally engineered as a paint rubbing compound for use with newer clear coats. It is commonly used on gel coat finishes today. The innovative combination of mineral and chemical technology cuts the fastest, minimizing pad heating. It maximizes productivity while still leaving the finest finish, minimizing machine polishing in the next step. It leaves such a fine finish.

Highlights

• 3M’s best-performing rubbing compound for removing P1200 or finer sand scratches
• Formulated for a broad range of user conditions without sticking or leaving residual film
• Works especially well on many newer, harder-to-buff clear coats
• Smooth-handling compound reduces powdering and leaves a refined finish on all auto-paint surfaces
• Holds better on compounding pads for reduced sling, mess and cleanup time
• Part of the 3M™ Perfect-It™ Paint Finishing System for showroom-grade finishes

3M™ Perfect-It™ EX AC Rubbing Compound is the best-performing 3M rubbing compound for removing P1200+ sand scratches and surface defects before polishing, even on the latest clear coats. It is formulated to perform in all conditions, including high heat and humidity, without sticking to panels or leaving film residue. It delivers a longer working time, yet still reduces sling for easier cleanup.

W&W typically stocks 3m Perfect-It Rubbing Compound.

3M Perfect-It Polish Compound Step 2 is available HERE.