TRIG TA70
Manufacturer Part Number: 01740-00
Trig TA70 GPS Antenna
General Description
Trig TA70 GPS Antenns - Trig’s GPS antenna has been produced in conjunction with partners RAMI to ensure optimum performance with all Trig GPS position source products. The TA70 provides you with a fully certified TSO-C190 antenna – compatible and proven with Trig transponders and supported by our free ADS-B STC program.
Trig’s GPS antenna is a future proof product, it is fully compliant with the latest FAA 2020 ADS-B requirements – this makes it the logical choice in the majority of installations.
Features
- TSO C-190 certified antenna
- Optimised for use with Trig GPS units
- Compliant for 2020 ADS-B Out
- Lightweight and simple to install
- Superior gasket for a weather tight seal
- Ideal as a retro-fit antenna option
| Specification | TA70 Antenna |
| Type | GPS antenna – SBAS supports EGNOS, GAGAN, MSAS and WAAS |
| Certification | TS0-C190 |
| Compliance | DO-301, DO-160G |
| Supply voltage (DC) | 4.5-14.5 VDC |
| Typical consumption (at 14v) | 40mA Typ / 60mA max |
| Nominal Transmitter Power | N/A |
| Operating temperature | -55 to +70 |
| Cooling requirement | N/A |
| Weight | 0.31 lbs |
| Dimensions (inches) | 1.59” x 2.87” x 4.71” |
ADS-B OUT
(1090ES ADS-B Out is the international standard and can be used worldwide)
ADS-B OUT AND ADS-B IN
This illustrates aircraft operating within a full ADS-B environment. Note that ground services are only available in the U.S. (these include weather and traffic services).
- TA70 GPS Receiver
- All Trig products come with a two year warranty, starting from the day of installation
- Installation instructions
- Mounting template
Experimental Glider
Certified Glider
Does the TA70 come with all Trig GPS receivers?
The TA70 antenna is included as standard in a TN70 GPS kit. This simplifies compliance as both the GPS and antenna meet the FAA 2020 mandate for ADS-B.
However, the TA70 is not included when purchasing a TN72. This is because uncertified pilots do not need a certified antenna.
What type of connector does the TA70 have?
The TA70 has a screw on TNC connector.
Experimental Certificate
Certified Certificate
| Product / Model | Type | Suitable for 2020 ADS-B rule airspace (US) or similar mandated ADS-B airspace | Supply voltage (DC) | Part Number |
| TA70 | WAAS GPS antenna – ideal retro-fit /with rubber gasket | Yes – certified to TSO-C190 | 4.5-14.5 VDC | 01740-00 |
