Icom IC-A120 VHF Airband Mobil Transceiver
Manufacturer Part Number: IC-A120
Icom IC-A120 VHF Airband Mobile Transceiver
General Description
Icom IC-A120 VHF Airband Mobile Transceiver - introduces two features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition.
The IC-A120 also features an ON-Hook scan function that automatically starts scanning when the hand microphone is hooked on the microphone hanger. When a user takes the microphone OFF hook, the scanning stops at the priority channel or displayed channel. A Dualwatch function checks the priority and operating channels alternatively. Meets IP54 standards for dust protection and water-resistance.
This version IC-A120 includes a vehicle mount and hand microphone.
- Dot-matrix LCD display is easy to read with crisp, clear text
- Memory channels and other radio settings can be programmed from the front panel
- Provides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacing
- Built-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signals
- Automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time)
- IP54 dust-protection and water-resistant construction allows the IC-A120 to be used in open-air vehicles
- ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger
- Dualwatch feature checks the priority and operating channels alternatively while ON-Hook
- Provides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added — allowing for third-party wireless Bluetooth headsets to be used
- Third-party headsets can be used with the optional OPC-871A headset adapter
- Optional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built-in speaker
- The speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functions
- Compatible with 12- and 24- volt systems
- 36W (PEP) RF output power
- Power-on password protection
- PC programming capability
- CI-V Commands for external control
- VE-PG3 RoIP gateway for interconnecting with other radio devices
| Weight | 1.5 kg (3.3 lb) |
| Dimensions | 161 x 45 x 193 mm (6.34 x 1.77 x 7.6 in) |
| Frequency Range | 118.000 to 136.992 MHz |
| Channel Spacing | 25 kHz/8.33 kHz |
| Type of Emission | A3E (AM) |
| Number of Memory Channels | 200 channels |
| Antenna Connector | M type (50Ω) |
| Power Supply Requirement | 13.75 V/27.5 VDC |
| Current Drain (at 13.75 VDC) | Transmitting: 5.0 A max. Receiving: 4.0 A (at AF max.), 0.5 A at standby |
| Operating Temperature Range | -30°C to 60°C |
| Frequency Stability | ±5 ppm (-30°C to 60°C) |
| TRANSMITTER | Output Power (at 13.75V): 9.0 watts typical (carrier power) |
| Modulation | 70% to 100% |
| Spurious Emission | less than 60 dB (harmonics/non-harmonics, 30MHz to 1 GHz) |
| Microphone Impedance | 600Ω |
| RECEIVER Intermediate Frequency |
38.85 MHz/450 kHz (1st/2nd) |
| Sensitivity (pd | 1 µV (6 dB S/N) |
| Selectivity | 8.33 kHz: 2.778/7.37 kHz (6 dB/ 60 dB) 25 kHz: 8/25 kHz (6 dB/60 dB) |
| Spurious Response | more than 74 dBµ |
| Audio Output Power | 10% distortion, 60% modulation |
| Internal Speaker | 1.5 watt (8Ω load) |
| External Speaker | more than 10 watt (8Ω load) |
| Headphones | more than 100 mW (500Ω load) |
| Applicable IP Rating | dust and water: IP54 (dust-protection and water resistance) |
- Vehicle mount
- Hand microphone (HM-216)
- DC power cable
- Microphone hanger kit
- Mounting bracket kit
- Fuses
