LX Navigation Colibri X Power and Data Interface Cable
General Description
LX Navigation Colibri X Power and Data Interface Cable is a special unit that coverts 12V to 5V power supply for the Colibri X. It also converts TTL levels of serial communication to RS232 levels. Maximum input voltage is 24V.
The unit has two plugs. On one side there is a standard micro USB connector. Use the included USB cable to connect the Colibri X on this side. On the other side is an RJ45 plug. This plug is a standard IGC 6–pin connector.
This unit can connect Flarm and Colibri.
Pins by numbers:
• 1 = + 12 V (red external wire)
• 2,3 = not used
• 4 = data out (RS232)
• 5 = data in – input (RS232)
• 6 = GND (blue external wire
Why LX Navigation?
LX Navigation is one of the oldest glider navigation brands. Its founders started experimenting with glider computers way back in the 70's and the Company has been working on improving your flight performance ever since.
Throughout the last 40 years or so it has been working on instruments that most pilots will have used at some time. In fact their equipment can be found in almost any gliding club!
LX Navigation equipment has always been ground–breaking.
