TOST–AERO 200X50 Tire
TOST has a great selection of aircraft tires from 3 inch to 10 inch available from stock.
For more than 30 years now TOST has manufactured aircraft tires exclusively under the brand TOST AERO in the dimensions: 200x50, 260x85, 4.00–4 and 336x115–5. Characteristics are: long lifetime, very robust, for high load and speed.
Tire Maintenance Instructions
• Maintain stipulated air pressure, check at regular intervals!
Underpressure results in reduced load capacity and shortens service life.
• Inspect tires at regular intervals for damages, shredding, flat areas and foreign objects.
• Wheel units must be mounted perfectly balanced. Wheel imbalance can result in a damage to bearings and brake drums.
• Keep tires free of oil, grease, brake fluid and tar. Clean tires with rag soaked with petrol, then wash off with soap and water.
History of TOST
TOST has more than 60 years of experience in the development and manufacturing of aviation safety equipment. It's a family business – run in the fourth generation – they stick to the motto: Conserving the well–proven system – Developing forward.
The cornerstones of their corporate policy are:
Customer satisfaction is their highest goal. The customer is the king – he should like to come back – and not like to send the product back.
Since 1969 TOST holds a LBA approval as Design and Production Organization. (LBA= German Aviation Authorities). In the meantime, all approvals are issued by the EASA. In yearly audits through the aviation authorities, the compliance with quality standards is checked and kept record of. Over and above those official regulations, they live the quality thought in their every–day work.
Modern manufacturing techniques, economical resource management and the long lifetime of TOST products are their contribution to the protection of the environment. Gliding is an ecologically friendly sport.
Long standing relations to their customers, suppliers and employees stand for the continuity in their company.
TOST Notes on Inner Tubes
Aircraft tubes are made from natural rubber and they are slightly underdimensioned so that it is easier to install them in a new tire. The layers of an aircraft tire are made of nylon – they therefore tend to become larger with use.
The inner tube also increases in size, adapting to the larger inside diameter of the tire. If a tube enlarged in this way is later fitted in a new tire, it can happen that it is too big for the inside of the tire, with the result that the tube may crease. These creases may rub through during operation, causing the tube to loose pressure. Rubbing through slowly results in slow pressure loss – the pilot is thus warned before a dangerous situation arises. If the tube tears during a start, the pilot will fail to notice that he is flying with a flat tire.
Taking into consideration all the risks involved with fitting an old tube into a new tire, it is advisable always to fit new inner tubes in new tires.