Artex ELT 1000 With Whip Antenna
Manufacturer Part Number: 8203
Artex ELT 1000 With Whip Antenna
General Description
Artex ELT 1000 With Whip Antenna 8203 - is an excellent, cost-efficient option for upgrading standard 121.5 MHz transmitters, which are no longer monitored by the Cospas-Sarsat System. The ELT 1000 is a single-ouput ELT that transmits on both 406 MHz and 121.5 MHz using the same RF output and one coax cable. The 406 signal alone produces an accurate position within 1.86 miles and when paired with the aircraft's navigation system via the built-in GPS interface, the ELT's accuracy is further improved to about 110 yards. The GPS interface does not require aircraft power to operate and the remote switch only requires two wires, which reduces installation costs and labor.
*9600 standard baud rate unless otherwise requested.
- Automatic fixed emergency locator transmitter
- Single antenna output for emergency transmission on both 406 MHz (Cospas-Sarsat) and 121.5 MHz frequencies
- Enhanced positional accuracy with a GPS interface that does not require aircraft power
- Encoded digital message broadcasts aircraft identification, registration and owner, and emergency contact details
- Weight: 2.2 lb (996 g) with tray
- 6-year, LiSO2 battery
- Cospas-Sarsat, FAA TSO, Industry Canada approved
Weight | 2.2 lb (total with tray) |
Dimensions | 6.59 x 3.69 x 2.86 in |
Operating frequencies | 121.5 MHz +/- 5 KHz 406.0 to 406.1 MHz |
Output power | 406 MHz: SW for 24 hours @-20°C to +55°C (-4°F -131°F) 121.5 MHz: 100 mW min >50 hours@ -20C to +SSC (-4°F- 131°F) |
Output connector | BNC female |
Activation | Automatic by 4.5 ft/sec (2.3 G) Primary G-Switch and Manual Activation |
Battery | 6-year Lithium LiSO₂ |
Temperature | Operating: -20°C to +55°C (-4°F - 131 °F) Storage: -55°C to +85°C (-67°F - 185°F) |
- 406 MHz ELT
- Whip antenna (110-773)
- Remote switch (8304)
- Installation kit
- Audio buzzer and connectors