Eos PNA Power and Data

General Description

Eos PNA power and data interface is a special unit that connects straight to User port on Eos device.

Features

• It has 5V power supply on USB connector for charging your PNA.It also converts TTL levels of serial communication to RS232 levels suitable for PNAs.
• On one side there is a 5pin USB mini B connector. Use this to connect to your PNA. On other side there is 6–pin RJ11 cable. You should connect this to USER port on LX Eos.
• Note: Some PNAs (e.g. Vertica) are using 10 pin USB mini–B connectors. Use 5–pin to 10–pin extension cable which is usually supplied with the PNA device.
• USB mini B pinout:
Pin 1 = +5V
Pin 2 = RX
Pin 3 = TX
Pin 4 = +5V
Pin 5 = GND

Functions

• Variometer, TE compensation by TE probe or electronic way
• Speed–to–fly function
• Final glide calculator based on GPS data!
• Simple navigation to TP and TSK
• High level IGC approved flight recorder
• Flarm radar screen (ADSB and Flarm Traffic)
• Thermal assistant screen
• System extensions: Second seat configuration, Remote control operation (LX Joy)
• Logbook
• Flight information with Barograph
• Multi pilot support
• Accurate wind calculation in straight flight and circling



Why LX Navigation?

LX Navigation is one of the oldest glider navigation brands. Its founders started experimenting with glider computers way back in the 70's and the Company has been working on improving your flight performance ever since.

Throughout the last 40 years or so it has been working on instruments that most pilots will have used at some time. In fact our equipment can be found in almost any gliding club!

LX Navigation equipment has always been ground–breaking.

LX Navigation motto?



LX navigation
Write Your Own Review
You're reviewing:Option - LX Navigation EOS PNA Power and Data