Davtron M800 (M800 14V) Digital Clock
General Description
Davtron's various clocks and multi–functional chronometers are designed to work under the most stringent operating conditions. All of Davtron's new clocks are a two button design that make the pilot's job easier. These clocks display universal time, local time, and elasped time. The advanced clocks add a flight time channel to use for fuel timing. There are two different types of displays available, liquid cyrstal or incandecent; both are readable in high sunlight situations.
Features
• 2¼″ Internal Mount• Two Button Control System
• Laser Engraved Faceplate
• Universal Time
• Local Time
• Elapsed Time With Countdown Timer
• Elapsed Time Alarm
• Option Audio Alarm
• Liquid Crystal Display
• Night Illumination
• NVIS Green A Option
• Keep Alive Battery Option
• FAA–PMA Approved
Installation Eligibility
Diamond Aircraft Model DA20–A1. Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35–33, and 35–A33
Operation
The SEL button selects what is to be displayed on the four digit window and the CTL button controls what is being displayed. Pressing select sequentially selects GMT, Local Time, Elapsed Time and back to GMT. The control button starts and resets Elapsed Time when momentarily pushed. Normal operation of the M800 cannot accidentally reset time.
Setting GMT
Select GMT for display in the four digit window with the SEL button. Simultaneously press both the select and control buttons to enter the set mode. The tens of hours digit will start flashing. The control button has full control of the flashing digitand each button push inccrements the digit. Once the tens of hours is set the select button selects the next digit to be set. After the last digit has been selected and set with the control button, a final push of the select button exits the mode. The lighted annunciator will resume its normal flashing, indicating the GMT clock is running.
Setting LT
Select Local Time, LT, using the SEL button. Simultaneously push the SEL and CTL buttons to enter set mode. The tens of hours digit will start flashing. The set operation is the same as for GMT, except that minutes are already synchronized with the GMT clock and cannot be set in Local Time.
Test Mode
Hold the SEL button down for three seconds and the display will indicate 88:88 and activate all three annunciators.
Elapsed Time Count Up
Select ET for display. Pressing the CTL button will start ET counting. Elapsed time counts up to 59 minutes, 59 seconds, and then switches to hours and minutes. It continues counting up to 99 hours and 59 minutes. Pressing the CTR button again resets ET to zero.
Elapsed Time Count Down
Select ET for display and enter set mode by pressing both buttons. The countdown timer can now be set. Entering the time is identical to GMT time setting. When the time is entered and the last digit is no longer flashing the clock is ready to start the countdown. Momentarily pressing the CTL button starts the countdown. When the count reaches zero the displays flash and the external alarm is activated. Pressing either SEL or CTL will deactivate the alarm. ET continues counting up.