EXPERIMENTAL Decal

General Description

EXPERIMENTAL Decal - made in-house and is available from stock. This decal is available in Black, Red, Navy Blue or White. It measures approximately 2" high and 10" long. It has the word "EXPERIMENTAL" in all capitol letters.

This premium film can be applied on any smooth surface. Apply on car windows, sailplane trailers, toolboxes, hangar doors, notebooks, laptops and more.

We use only the best materials. Our high gloss premium film is rated for 7 years of continuous outdoor use. It is the thinnest on the market at 2 mils. This is an air-egress film. If a small bubble develops during installation it will go away in just a few days.

International Customers - Please note. If you have other non-free shipping items in your shopping cart please select "FREE Domestic US First Class Mail".

Decal price varies depending on selection above.

Height 2"
Width 10"

Step 1: Clean the Surface

If applying on gelcoat clean with Wx Seal or similar. For plastic or glass use an all purpose cleaner or window cleaner. Do not apply when the temperature is less than 60° or over 90°.

Step 2: Make A Hinge

Apply a line of tape along the top of the decal. Half of the tape goes on the translucent paper and the other half will be stuck to the surface in Step 3.

Step 3: Place

Carefully line up and place your decal on the surface. It's easier on large decals to Skip step 2 and place two small pieces of tape on each upper corner then stick to the surface. This way if it's not lined up perfect you can easily remove it. Once satisfied with the position then take a long piece of tape along the top to serve as a hinge. NOTE: If you use a wet installation with a splay bottle, drop of soap and water DO NOT let the decal sit wet for more than 5 minutes. IF left too long the translucent paper will degrade.

Step 4: Remove Backing

 Flip the decal over on the hinge and carefully peal off the backing. Your decal will be left in the translucent paper. Be careful not to let the adhesive on the decal to touch the surface at this point.

Step 5: Apply Decal

Carefully apply pressure and work from the hinge top to the bottom. Using a squeege is best. Squeegee at a 45 degree angle with overlapping, firm strokes. Now give it a few minutes for the adhesive to grab hold.

Step 6: Remove Translucent Paper

Carefully pull upwards to remove the translucent tape.


Write Your Own Review
You're reviewing:"EXPERIMENTAL" Vinyl Transfer 2"