Combi-Tape

General Description

Combi-Tape - combines pre-bent Mylar with an integrated 3–D turbulator. This tape is typically used on horizontal and vertical stabilizers. The tape comes with an adhesive backing. To apply clean the aircraft surface, peel off the backing, and apply the adhesive to the most aft portion of the stabilizer. The Mylar half now bridges the control surface gap. 

Combi-Tape is .5mm thick.

Combi–Tape is sold per meter. Price varies depending on selection. Add number of meters in “Qty:” above.

PLEASE NOTE: As per manufacturer instructions, Combi-Tape is stored flat (but shipped rolled). The longest continuous length is 12 meters but is limited to the cut pieces on hand. If ordering over 12 meters, please let us know the lengths of cut pieces you need.

Combi-Tape is available as a sample - click here.

Aircraft Seal With a Top or Bottom Hinge

  1. PVC Anti–Peel “tesa® Safety Tape”
  2. Pre–Curved “Mylar Gap Seal”
  3. “tesa® Transfer Tape” (Double sided adhesive tape)
  4. Glass Cloth “Tef. Fabric Tape” with single side adhesive 

Aircraft Seal With a Center Hinged Control Surface

The seal is internal and requires the control surface to be removed for seal installation.

  1. Teflon Sealing Tape “Tef. Fabric Tape” Non–adhesive
  2. PVC Anti–Peel “tesa® PVC Safety Tape”
  3. Pre–Curved “Mylar Gap Seal”
  4. “tesa® Transfer Tape” (Double sided adhesive tape)
  5. Glass Cloth “Tef. Fabric Tape” with single side adhesive (optional) 
  6. 3D “Turbulator Tape” (Zig Zag or Dimple Turbulator Tape)

Write Your Own Review
You're reviewing:Combi-Tape
We found other products you might like!