Kit consists of the following parts:
1.Disk Brake wheel, 5" 122mm width, 25mm bearing
2.075820 Brake assy. 30-9 for use with DOT 4 Brake Fluid
3.075830 Hydraulic Fitting straight
4. 055762 Torque Plate assy. with anchor bolt
5. 055763 Butt assy. for attachment of the brake
6. 058270 Master Cylinder type 7
7. 059510 Support for Master Cyl.
8. Hydraulic hose type 3
9. 058550 Hollow screw with copper gaskets
10. General arrangement drawings
Required work: Installation of the wheel unit, brake assembly and master cylinder with reservoir, laying of hydraulic hoses, filling and bleeding of the system. We may recommend you to contact the responsible inspector before you start the process of modification. Thus you can coordinate the procedure of a "single piece" approval through the EASA if required. If you have only little experience with hydraulic systems, we would recommend to contact an appropriate work shop to have done that modification.